Recce NI Department
Essential shooting, maintenance, storage and outdoor accessories.
Looking for reloading equipment? It is listed in a separate department. Browse reloading part groups
Showing 1753–1776 of 1786 results
Narrow this department
Choose the product type and specifications you need instead of scrolling through the whole department.
Showing 1753–1776 of 1786 results
Individual Wheeler F.A.T. Stix torque limiter preset to 50 in-lb (manufacturer part 1192772). Wheeler specifies ±5% accuracy and compatibility with its F.A.T. Stix T-handle or other drivers accepting ¼-inch bits. Check the required fastener torque before use.
Individual Wheeler F.A.T. Stix torque limiter preset to 55 in-lb (manufacturer part 1192773). Wheeler specifies ±5% accuracy and compatibility with its F.A.T. Stix T-handle or other drivers accepting ¼-inch bits. Check the required fastener torque before use.
Individual Wheeler F.A.T. Stix torque limiter preset to 60 in-lb (manufacturer part 1192774). Wheeler specifies ±5% accuracy and compatibility with its F.A.T. Stix T-handle or other drivers accepting ¼-inch bits. Check the required fastener torque before use.
Individual Wheeler F.A.T. Stix torque limiter preset to 65 in-lb (manufacturer part 1192775). Wheeler specifies ±5% accuracy and compatibility with its F.A.T. Stix T-handle or other drivers accepting ¼-inch bits. Check the required fastener torque before use.
Wheeler F.A.T. Stix Preset Torque Wrench Set with preset torque limiters, an ergonomic T-handle and a selection of gunsmithing bits. Supplied in a soft carry case; check the individual limiter settings before use.
Adjustable Wheeler F.A.T. Wrench with a recorded 10–65 in-lb torque range, ten black phosphate-coated bits, textured rubber handle and moulded case. Designed for controlled fastener tightening. Check the equipment maker’s torque specification and confirm the current package contents before ordering.
Wheeler F.A.T. Wrench AutoTorque is a battery-powered torque-limiting screwdriver with a recorded 10–65 in-lb range, motor stop at the selected setting, speed up to 200 RPM, LCD display and four LED work lights. Battery contents remain unverified.
Replacement Wheeler F.A.T. Wrench AutoTorque Battery, specified as a detachable 12V lithium-ion unit for the AutoTorque tool. It supports USB-C charging and provides an LED charge-status indicator; check the named tool compatibility.
Wheeler Hammer and Punch Set with a combination polymer-and-brass hammer, eight brass punches, four steel punches and two plastic punches. A moulded case is included to organise the different workshop tools.
Wheeler 220-grit lapping compound in the recorded 1 oz size. An individual coarser-grade abrasive compound from Wheeler’s lapping range, rather than the three-grit kit. Check the required grade and the relevant manufacturer’s instructions before use.
Wheeler 320-grit lapping compound in the recorded 1 oz size. An individual medium-grade abrasive compound from Wheeler’s lapping range, rather than the three-grit kit. Check the required grade and the relevant manufacturer’s instructions before use.
Wheeler 600-grit lapping compound in the recorded 1 oz size. An individual fine-grade abrasive compound from Wheeler’s lapping range, rather than the three-grit kit. Check the required grade and the relevant manufacturer’s instructions before use.
Wheeler lapping compound kit with 220-, 320- and 600-grit abrasive compounds, one of each grade according to the manufacturer’s listing. Intended as replacement compound for lapping work, not a complete tool kit. Check the procedure and supplied contents before use.
Wheeler Level-Level-Level scope levelling aid for use during telescopic sight installation. Helps align the rifle and scope before final tightening of the mounting hardware. Listed as the individual levelling system, not a complete mounting kit. Supplier SKU 126037.
Wheeler Master Roll Pin Punch Set combining starter and roll-pin punches in nine sizes, with knurled handles, a nylon hammer head and moulded storage case. This combined kit differs from the separately sold starter and punch sets.
Wheeler dual-face Nylon/Brass Hammer for bench and workshop tasks. The nylon face is suited to gentler alignment work, while the brass face can be used with appropriate punches and pins. Select the correct face and force for each task. Supplier SKU 126063.
Wheeler Precision Micro Screwdriver Set with 58 chrome-plated precision bits, an extendible handle and a flexible extension shaft. The bits are marked for identification and the kit is supplied in a storage case.
Wheeler Professional Digital Trigger Gauge with a 0–12 lb measuring range, stated ±0.2% accuracy and live, average, minimum and maximum modes. Features an audible indicator, folding sensor arm and storage case.
The Wheeler Professional Laser Bore Sighter in Green is recorded with a high-power green laser, magnetic barrel attachment and machined aluminium housing. The catalogue also lists a reflective grid, storage case and lithium 123A battery. Check suitability for the intended equipment.
The Wheeler Professional Reticle Levelling System uses machined-aluminium reference and barrel-clamp levels to help align a scope reticle during mounting. Its recorded components include non-marring barrel pads, a magnetic reference level and a storage case.
Wheeler workshop fixture for recoil-pad fitting. Transfers stock toe-line and comb angles to support off-stock sanding on a table-mounted belt or disc sander. This listing is for the fixture; a sander is not confirmed as included.
Wheeler Roll Pin Punch Set comprising nine sizes of hardened-steel punches with ball-profile tips. Supplied with a roll-up nylon pouch; check the set type when choosing between these punches and the separate starter set.
Nine-size Wheeler Roll Pin Starter Set with hardened-steel punches and counter-bored tips. The included roll-up nylon pouch keeps the starter punches together between workshop jobs and distinguishes this set from the separate punch set.
Wheeler 45 Piece SAE, Metric Hex and Torx Key Set. This assortment combines the three recorded key types in an organised carry case, making it distinct from the separate P-handle and benchtop screwdriver sets.
Need help choosing?
Tell us what you are trying to achieve and we can help you find the most relevant products and options.
| Cookie | Duration | Description |
|---|---|---|
| cookielawinfo-checkbox-analytics | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics". |
| cookielawinfo-checkbox-functional | 11 months | The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional". |
| cookielawinfo-checkbox-necessary | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary". |
| cookielawinfo-checkbox-others | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other. |
| cookielawinfo-checkbox-performance | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance". |
| viewed_cookie_policy | 11 months | The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data. |
