Recce NI Department
Essential shooting, maintenance, storage and outdoor accessories.
Looking for reloading equipment? It is listed in a separate department. Browse reloading part groups
Showing 1729–1752 of 1786 results
Narrow this department
Choose the product type and specifications you need instead of scrolling through the whole department.
Showing 1729–1752 of 1786 results
This Wheeler Delta Series Crowfoot Wrench covers the named 30mm to 1-5/16 size. It has a dual-ended hardened-steel design and black oxide finish, with a 1/2-inch drive connection for the Wheeler XL F.A.T. Wrench or another compatible torque wrench.
The Wheeler Delta Series 5/8 to 3/4 Crowfoot Wrench is a dual-ended hardened-steel tool finished in black oxide. The existing catalogue lists compatibility with the Wheeler XL F.A.T. Wrench and other 1/2-inch drive torque wrenches.
Dual-ended Wheeler Delta Series Barrel Nut Crowfoot Wrench in hardened steel with a black oxide finish. The listed 1/2-inch drive works with the Wheeler XL F.A.T. Wrench and other matching torque wrenches. Check the barrel-nut fitting required for your equipment.
The Wheeler Delta Series Castle Nut Crowfoot Wrench has a dual-ended hardened-steel construction and black oxide finish. It is listed for use with the Wheeler XL F.A.T. Wrench and other torque wrenches accepting a 1/2-inch drive connection.
Wheeler LR-308 magazine-well vise block made from non-marring, solvent-resistant polymer. The recorded design uses magazine-lock retention and a removable clamping arm. Listed for compatible AR LR/10 and SR25-type .308 lower receivers; confirm fit with the exact receiver.
The Wheeler Delta Series Sporter 1-inch High scope rings use 6061 aluminium, four-screw ring construction and adjustable bases. Weaver/Picatinny compatibility is recorded in the existing catalogue. This is the High variant for a 1-inch scope tube.
The Wheeler Delta Series Sporter 1-inch Low rings feature 6061 aluminium construction, a four-screw ring design and adjustable bases. The catalogue lists Weaver/Picatinny compatibility. This listing identifies the 1-inch tube diameter and Low height rather than other variants in the range.
These Wheeler Delta Series Sporter rings are the 1-inch Medium configuration. Their recorded features are 6061 aluminium, a four-screw ring design and an adjustable base for Weaver/Picatinny mounting arrangements. Select the stated tube diameter and Medium height for the intended setup.
The Wheeler Delta Series Sporter rings in 30mm High configuration have a 6061 aluminium body, four-screw ring design and adjustable bases. The recorded mounting compatibility covers Weaver and Picatinny rails. The listed variant is for 30mm scope tubes.
The Wheeler Delta Series Sporter rings in 30mm Low configuration use 6061 aluminium and a four-screw ring design. The existing catalogue describes an adjustable base with Weaver/Picatinny compatibility. Choose this listed diameter and height for the intended scope mounting arrangement.
These Wheeler Delta Series Sporter rings are the 34mm Low variant. The catalogue records 6061 aluminium construction, a four-screw ring design and an adjustable base compatible with Weaver and Picatinny mounting rails. Check the stated diameter and height against your scope.
The Wheeler Delta Series XL F.A.T. Wrench AR-15 Crowfoot Set includes an XL F.A.T. Wrench with a recorded 10–150 ft-lb range, hardened-steel dual-ended crowfoot wrenches and a hard-sided case. The catalogue lists AR-15, AR-10 and LR-308 applications.
The Wheeler Delta Series XL F.A.T. Wrench Complete AR-15 Crowfoot Set is listed with a 10–150 ft-lb XL F.A.T. Wrench, hardened-steel dual-ended crowfoot wrenches and a hard-sided case. Recorded platform applications include AR-15, AR-10 and LR-308.
Wheeler Digital F.A.T. Wrench with a digital torque display, live and peak modes, and audible and visual torque indicators. The recorded kit includes black-phosphate-coated bits and a moulded case. Exact torque range requires manufacturer confirmation.
Wheeler digital scope alignment tool combining a 0.1-degree LCD level with a green cross-pattern bore-sighting laser. A self-centring magnetic barrel clamp supports alignment, while USB-C charging and a latching storage case make the system practical for workshop setup.
The Wheeler Essential Scope Mounting Kit includes a F.A.T. wrench and professional reticle levelling system according to the existing catalogue. Black-phosphate coated bits and a hard-sided case are also recorded. This is the Essential kit rather than the larger Ultra version.
Individual Wheeler F.A.T. Stix torque limiter preset to 10 in-lb (manufacturer part 1192764). Wheeler specifies ±5% accuracy and compatibility with its F.A.T. Stix T-handle or other drivers accepting ¼-inch bits. Check the required fastener torque before use.
Individual Wheeler F.A.T. Stix torque limiter preset to 15 in-lb (manufacturer part 1192765). Wheeler specifies ±5% accuracy and compatibility with its F.A.T. Stix T-handle or other drivers accepting ¼-inch bits. Check the required fastener torque before use.
Individual Wheeler F.A.T. Stix torque limiter preset to 20 in-lb (manufacturer part 1192766). Wheeler specifies ±5% accuracy and compatibility with its F.A.T. Stix T-handle or other drivers accepting ¼-inch bits. Check the required fastener torque before use.
Individual Wheeler F.A.T. Stix torque limiter preset to 25 in-lb (manufacturer part 1192767). Wheeler specifies ±5% accuracy and compatibility with its F.A.T. Stix T-handle or other drivers accepting ¼-inch bits. Check the required fastener torque before use.
Individual Wheeler F.A.T. Stix torque limiter preset to 30 in-lb (manufacturer part 1192768). Wheeler specifies ±5% accuracy and compatibility with its F.A.T. Stix T-handle or other drivers accepting ¼-inch bits. Check the required fastener torque before use.
Individual Wheeler F.A.T. Stix torque limiter preset to 35 in-lb (manufacturer part 1192769). Wheeler specifies ±5% accuracy and compatibility with its F.A.T. Stix T-handle or other drivers accepting ¼-inch bits. Check the required fastener torque before use.
Individual Wheeler F.A.T. Stix torque limiter preset to 40 in-lb (manufacturer part 1192770). Wheeler specifies ±5% accuracy and compatibility with its F.A.T. Stix T-handle or other drivers accepting ¼-inch bits. Check the required fastener torque before use.
Individual Wheeler F.A.T. Stix torque limiter preset to 45 in-lb (manufacturer part 1192771). Wheeler specifies ±5% accuracy and compatibility with its F.A.T. Stix T-handle or other drivers accepting ¼-inch bits. Check the required fastener torque before use.
Need help choosing?
Tell us what you are trying to achieve and we can help you find the most relevant products and options.
| Cookie | Duration | Description |
|---|---|---|
| cookielawinfo-checkbox-analytics | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics". |
| cookielawinfo-checkbox-functional | 11 months | The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional". |
| cookielawinfo-checkbox-necessary | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary". |
| cookielawinfo-checkbox-others | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other. |
| cookielawinfo-checkbox-performance | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance". |
| viewed_cookie_policy | 11 months | The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data. |
