Recce NI Department
Essential shooting, maintenance, storage and outdoor accessories.
Looking for reloading equipment? It is listed in a separate department. Browse reloading part groups
Showing 145–168 of 214 results
Narrow this department
Choose the product type and specifications you need instead of scrolling through the whole department.
Showing 145–168 of 214 results
ANSCHÜTZ ONE BASIC 100 g buttstock weight, manufacturer item 014873, supplied with fixing screws. Designed for the ONE BASIC rear stock; the manufacturer states that up to three weight plates can be fitted using the supplied screw.
ANSCHÜTZ ONE bipod fore-end support, manufacturer part 014720, designed specifically for the ONE air-rifle stock. This is a model-specific support accessory rather than a universal-fitting bipod. Check the ONE stock interface before ordering.
ANSCHÜTZ ONE Edge quick-clamp hand stop, manufacturer reference 019811. The manufacturer’s ONE Edge version is distinct from its standard ONE quick-clamp hand stop. Confirm the exact fore-end attachment and model compatibility before ordering; interchangeable fittings are not assumed.
ANSCHÜTZ ONE aluminium feedback rod, 85 mm long and weighing 100 g. Provides a repeatable contact point at the rear stock and accommodates additional weight rings. Manufacturer item 013889; verify suitability for your existing configuration.
Original ANSCHÜTZ ONE Para Long set for the ONE buttstock, manufacturer reference 014722. Listed separately from the standard 80 mm and 42 mm Para sets. Verify the existing ONE rear-stock configuration before ordering.
Steel quick-change adapter for ANSCHÜTZ ONE parallel adjustment assemblies, allowing compatible ONE accessories such as a fore-end raiser or hand stop to be exchanged. Measures 20 × 20 × 20 mm; Torx T20 fitting required. Reference 014938.
Black aluminium UIT profile rail for the ANSCHÜTZ ONE stock system. Designed to mount suitable fore-end raisers and accessories, with fixing screws included. Manufacturer reference 014721; check the stock interface before ordering.
ANSCHÜTZ Para Long stock-fitting set, 80 mm version, manufacturer reference 016300. Distinct from the separately listed 42 mm Para Short set. Check the original stock assembly and required extension length before ordering.
ANSCHÜTZ Para Short stock-fitting set, 42 mm version, manufacturer reference 014723. A shorter alternative to the separately listed 80 mm Para Long set. Check the original stock assembly and required length before selecting this component.
ANSCHÜTZ plastic bolt-handle knob with a 25 mm diameter and M8 internal screw thread. A model-specific replacement fitting rather than a complete bolt assembly. Check your existing thread and handle configuration. Reference 019725.
Single ANSCHÜTZ PRECISE adjusting nut for a 15 mm buttplate-extension column, manufacturer reference 016633. Used for fine adjustment of buttstock length on compatible PRECISE buttplate outriggers. Distinct from the separate lock nut; confirm the assembly before ordering.
ANSCHÜTZ PRECISE II replacement buttstock hinge set, part 015343. Includes two hinge components, six M5 × 12 screws and six locking washers. Aluminium construction, approximately 110 g; a 4 mm hex key is required for installation. Intended for compatible PRECISE air-rifle stocks.
Single ANSCHÜTZ PRECISE replacement lock nut for a 15 mm buttplate-extension column, manufacturer reference 016638. Intended for compatible PRECISE buttplate outriggers to secure the column setting. This is the lock nut, not the separate adjusting nut; check your assembly before ordering.
Set of two removable ANSCHÜTZ sling swivels for a 1-inch sling connection. The listing supplies a pair of fittings, not a carrying sling. Confirm the swivel mounting interface on your equipment. Manufacturer reference 007663.
ANSCHÜTZ SCATT adapter for the 6870 LUXUS biathlon front sight tunnel, manufacturer reference 015786. A model-specific accessory, not a complete SCATT training system or sight assembly. Confirm the intended front-sight configuration before ordering.
ANSCHÜTZ special key, reference 011542, for the fitting and release of compatible compressed-air cylinders. This is a separate maintenance tool, not a replacement cylinder. Confirm the intended equipment model before ordering.
ANSCHÜTZ blackened-steel weight carrier, approximately 65 mm long, for the buttplate extensions and cheekpieces of specified 9015, 9003 and 8002 systems. Manufacturer item 016697. The manufacturer’s stated length corrects the older 70 mm catalogue title.
◆ 2 configurations available
£12.99 – £19.99Price range: £12.99 through £19.99ANSCHÜTZ tool-kit options for maintenance and adjustment. Choose five hex keys in Set No. 1, covering 1.5–4.0 mm, or three Torx tools in Set No. 2, including TX10, TX20 and TX30. Select the required set before ordering.
ANSCHÜTZ XXL aluminium front sight riser, reference 017174. Raises the front sight line by 18 mm and clamps to an 11–13 mm prism rail. Supplied as the front component; the matching rear riser and complete set are separate products.
ANSCHÜTZ XXL rear/diopter sight riser, reference 016645, providing an 18 mm sight-line increase on an 11–13 mm prism rail. Aluminium construction, approximately 55 mm long and 25 g. Rear component only; the matching front riser and complete set are listed separately.
Complete two-piece ANSCHÜTZ XXL front-and-rear sight riser set, reference 016644. Provides an 18 mm sight-line increase on compatible 11–13 mm prism rails. Aluminium construction, with 35 mm and 55 mm components and an approximate combined weight of 60 g.
◆ 6 configurations available
£8.99ANSCHÜTZ match-sight aperture inserts offered in six separately selectable opening pairs, from 2.7/4.7 mm to 3.8/5.8 mm. Choose the precise aperture specification for your existing sight. The listing supplies the selected insert rather than all sizes together.
ANSCHÜTZ barrel weight for the model 1771 rifle platform, listed at 365 g under supplier SKU 014684. This is the barrel-weight accessory only, not a complete barrel or rifle. Confirm the exact fitting and mounting requirements before purchase.
◆ 2 configurations available
£76.99 – £118.99Price range: £76.99 through £118.99Genuine ANSCHÜTZ bearing block for the matching ANSCHÜTZ system, with model-specific options shown in the selector.
Need help choosing?
Tell us what you are trying to achieve and we can help you find the most relevant products and options.
| Cookie | Duration | Description |
|---|---|---|
| cookielawinfo-checkbox-analytics | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics". |
| cookielawinfo-checkbox-functional | 11 months | The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional". |
| cookielawinfo-checkbox-necessary | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary". |
| cookielawinfo-checkbox-others | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other. |
| cookielawinfo-checkbox-performance | 11 months | This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance". |
| viewed_cookie_policy | 11 months | The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data. |
